On-Time or You Get Paid. (650) 844-2388 See guarantee terms

Case study

Paver Patio, Planters and Front and Back Yard Landscaping in Millbrae

A Millbrae front and back yard of worn lawn, gravel, red rock and overgrown shrubs rebuilt with a 597 sq ft Belgard paver patio and walkways, Anglia edger planters, gopher wire, nine irrigation valves on a Hunter WiFi controller, and 262 new plants and four box trees.

Belgard paver patio meeting a lawn with a young staked tree and a mulched bed along a board fence in a Millbrae back yard
Location
Millbrae
Scope
Paver Patio
Completed
June 2026
Project size
597
Investment
$68,600–$81,400
Full project details
Timeline
Sold April 20, 2026. Build ran May 18 to June 17, 2026 (31 calendar days), with two approved change orders. Project closed out June 18, 2026.

The challenge

Out front, this Millbrae yard was gravel and red rock beds with low brick planters and large, overgrown junipers. Behind the house, a worn lawn was crossed by concrete walks and wood raised beds, with gravel strips and overgrown shrubs along the fences, a small shed by the deck, and a side yard of weedy lawn and loose concrete blocks.

The landscaping had become outdated and overgrown. The owners wanted it refreshed for curb appeal, function and everyday use, with new hardscape and planting that would open up the space and divide it into distinct areas.

Our approach

Sequoia Outdoor replaced the old ground cover and minimal hardscape, front and back, with new pavers, planters, mulch, irrigation and planting, laid out to open up the yard and divide it into distinct areas. The crew removed the overgrown juniper, box hedge, 28 small and medium shrubs, a small tree stump, a small shed, an existing wall or footing, brick set in concrete and 100 sq ft of concrete, and took 2 in. of soil off 3,985 sq ft, with everything hauled away. They laid 597 sq ft of Belgard Catalina Grana Large 3-Piece 60mm pavers in regular colors for a patio in the back corner and walkways along the house, locked with G2 Alliance polymeric joint sand, and formed a 64 sq ft, 4 in. concrete slab with rebar and a broom finish in the side yard. Along the beds, 84 ln ft of Belgard Anglia edger in Victorian borders the planting where it meets the paving and frames a square planter around the existing tree, and 91 ln ft of Benda Board edging separates beds from lawn. Gopher wire went down across 1,571 sq ft. Nine irrigation valve assemblies with piping, tubing, sprinkler heads and emitters run from a Hunter Pro-HC 12-station WiFi smart controller with Hydrawise. To finish, the crew planted 258 one-gallon and four five-gallon plants and four 24 in. box trees with 5.5 cu yd of topsoil and nursery mix, and topped 2,414 sq ft of beds with brown mini bark.

The outcome

The finished back yard opens onto a lawn area framed by bark-mulched beds of new planting, with the existing tree in a square Anglia-edged planter. A Belgard Catalina Grana patio fills the back corner beside an Anglia-edged bed of flowering plants, and paver walkways run along the back and side of the house, past a new concrete pad. Out front, new planting on irrigation tubing replaces the gravel, red rock and overgrown junipers. The build ran May 18 to June 17, 2026, and the project closed out June 18.

Build highlights

Back yard of a Millbrae house cleared to bare soil, with broken concrete stacked for haul-away and the existing tree left in place

Old landscape out

Overgrown juniper, box hedge and 28 small and medium shrubs, a small shed, an existing wall or footing, brick set in concrete and 100 sq ft of concrete came out, and 2 in. of soil was removed across 3,985 sq ft, all hauled away. The existing tree stayed.

New Belgard paver walkway along the side of a house, with a bed lined in Anglia edger along the fence

Belgard Catalina Grana paving

597 sq ft of Belgard Catalina Grana Large 3-Piece 60mm pavers in regular colors went down for the patio and the walkways along the house, with G2 Alliance polymeric sand in the joints.

Row of Belgard Anglia edger holding a soil bed along a wood fence, beside new pavers

Anglia edger planter borders

84 ln ft of Belgard Anglia edger in Victorian borders the planting beds where they meet the new paving, and frames a square planter around the existing tree.

White irrigation pipe in open trenches across bare soil in the back yard, board fence beyond

Irrigation lines

Nine irrigation valve assemblies went in with their piping, tubing, sprinkler heads and emitters, run from a Hunter Pro-HC 12-station WiFi smart controller with Hydrawise.

Fresh four-panel concrete pad with a broom finish between new pavers and an Anglia-edged bed along a wood fence

Concrete pad in the side yard

A 64 sq ft, 4 in. concrete slab was formed, reinforced with rebar and broom finished beside the new side-yard walkway.

Gopher wire mesh covering bare soil around the existing tree in its new square planter of Anglia edger

Gopher wire under the lawn area

Gopher wire went down across 1,571 sq ft, laid over the open ground around the new tree planter.

New flowering plants and irrigation tubing in an Anglia-edged bed along a tall wood fence, beside the paver patio

Planting and mulch

258 one-gallon and four five-gallon plants and four 24 in. box trees went in with 5.5 cu yd of topsoil and nursery mix, and 2,414 sq ft of brown mini bark finished the beds.

Before and after

Before — worn lawn, concrete walks, gravel and wood raised beds behind a two-story Millbrae house with a rear deckAfter — open lawn with a young staked tree, mulched beds along the fence and the existing tree in an edged planter near the deck
Looking back toward the house, same deck, utility pole and board fence in both photos: worn lawn, concrete walks, gravel and wood raised beds gave way to an open lawn bordered by mulched beds and the new paver patio, with the existing tree in an Anglia-edged planter.
Before — weedy gravel and patchy grass in the back corner where a horizontal board fence meets a tall wood fenceAfter — Belgard paver patio in the back corner, with flowering plants in a bark-mulched bed behind a row of Anglia edger
In the back corner, same spot where the horizontal board fence meets the tall framed fence: a gravel strip became the Belgard Catalina Grana patio, with an Anglia-edged planting bed along the tall fence.
Before — concrete walk beside a deck, with a covered grill, trash bins and patchy lawn along the back of the houseAfter — Belgard paver walkway along the back of the house past the deck posts, with lawn and the edged tree planter to the right
Along the back of the house, same deck posts, back door and fence line in both photos: the concrete walk past the deck became a Belgard paver walkway, with the lawn and the edged tree planter beside it.

Frequently asked questions

How much does a paver patio and landscaping project like this cost in Millbrae?This project ran between $65,000 and $73,000 as built: the signed contract plus the changes approved during the build, covering 597 sq ft of Belgard Catalina Grana pavers for a patio and walkways, 84 ln ft of Belgard Anglia edger planter borders, gopher wire across 1,571 sq ft, nine irrigation valve assemblies on a Hunter WiFi controller, 262 plants and four box trees with mulch and topsoil, a 64 sq ft concrete pad, and the demolition and haul-away that came first. That as-built range is the project cost. The line-item table on this page allocates the same scope against our 2026 price book rather than reproducing the contract, and every line carries its own low and high, so adding the extremes together produces a wider band ($68,600 to $81,400) than the as-built range itself. Read the table as where the work sat, not as a second price. This project's line items price the plants and box trees as installation only; the plant material and the lawn are not itemized. Figures are rounded for client privacy. Our project minimum is $25,000. See how this project compares across everything we have published on the Bay Area landscaping cost index.
What exactly was installed?597 sq ft of Belgard Catalina Grana Large 3-Piece 60mm pavers in regular colors with G2 Alliance polymeric joint sand; 84 ln ft of Belgard Anglia edger in Victorian, forming the planter borders and a square planter around the existing tree; 91 ln ft of Benda Board landscape edging; gopher wire across 1,571 sq ft; a 64 sq ft, 4 in. concrete slab with formwork, rebar and a broom finish; nine irrigation valve assemblies with piping, tubing, sprinkler heads and emitters, on a Hunter Pro-HC 12-station WiFi smart controller with Hydrawise; 258 one-gallon and four five-gallon plants and four 24 in. box trees, priced as installation only; 5.5 cu yd of topsoil and nursery mix for planting; and 2,414 sq ft of brown mini bark. First, the crew removed 2 in. of soil across 3,985 sq ft, an existing wall or footing, 100 sq ft of concrete, brick set in concrete, a small shed, juniper, box hedge, 28 small and medium shrubs and a small tree stump, and hauled it all away.
How long did it take?The build ran May 18 to June 17, 2026: 31 calendar days, with two approved change orders. The project was sold April 20 and closed out June 18, 2026.
Can an existing tree stay when the yard is rebuilt?Usually, if the tree is healthy and the work is planned around its roots: keep the soil level at the trunk where it was, keep heavy digging away from the trunk, and give the tree a mulched bed rather than running lawn or paving right up to the bark. Here the existing tree in the back yard stayed while the lawn area, beds and walks around it were rebuilt. The old wood raised beds are gone, and the tree now sits in a square planter of Belgard Anglia edger in Victorian, filled with brown mini bark, with gopher wire laid around it.
Why lay gopher wire before a lawn or planting beds go in?Gophers tunnel up from below, leaving mounds and holes in a lawn and pulling new plants down by the roots, and repairing that damage means digging up a finished surface. Wire mesh laid across the ground before the lawn or beds go in stops them from coming up through it. On this project, gopher wire went down across 1,571 sq ft, including the lawn area around the edged tree planter.
What does a WiFi irrigation controller add?It waters to the weather instead of a fixed clock. A WiFi controller can adjust run times from local weather data, skip cycles after rain, and be checked or changed from a phone, and because each valve feeds its own zone, beds and lawn can run on separate schedules. This project has nine irrigation valve assemblies with piping, tubing, sprinkler heads and emitters, run from a Hunter Pro-HC 12-station WiFi smart controller with Hydrawise.
Who managed the project?A dedicated Sequoia project manager ran the build day to day and posted photo updates to the project channel from the first site visit through the final planting.

Project topics

Project location

Approximate neighborhood near Millbrae. The pin is displaced by approximately 150 metres to protect client privacy.

Want a project like this?

Tell us your space and scope. We will walk your property, set a real date in writing, and show you exactly how it gets built.